How Robots Change the Cleaning Industry

How Robots Change the Cleaning Industry

Remember how far the future looks like a child? You may have been daydreaming about cars driving cars and auto homes.

While some are still (unfortunately) far enough, the technology has gone very far. For example, the auto cleaning industry.

While your first thoughts may be from Roomba, robotic cleaning is much more advanced and sophisticated than we can imagine.

Read on to learn more about how robots change the way the cleaning industry operates.

How does it work? How Robots Change the Cleaning Industry
Perhaps the most interesting thing about robot cleaning technology is how it works. This technology is largely based on machine learning, a concept that aims to improve how to recognize machine patterns.

Pattern recognition is essential for basic cleaning tasks such as vacuuming and sweeping. In order for the robot to clean the room accurately, first must understand it.

This is where a lot of bumping and banging game. Do not be surprised if your new vacuum walks into the sofa a few times.

A Roomba With A View
If you’re just accustomed to thinking of robotic vacuums, it’s time to broaden your horizons.

Although the technology to suck up the dust is quite fascinating as well. For example, Dyson works on a line of AI-based home cleaners that connect with user’s intelligent home. This new machine uses computer vision to detect the most dirty areas of the user’s home.

These days, there are bots for almost every job you can think of. Boston Dynamics even created a robot dog that can load your plate and pick up trash. How Robots Change the Cleaning Industry

iRobot introduced Braava a few years ago, which was one of the first robot carpet cleaners.

There is also Winbot which gives you the freedom to never wash windows again. No more worries about the stains and odor of harsh cleaning chemicals.

And if you hate page work, be sure to look into LawnBott, which promises to symmetrically cut off your page.

What Does It Mean For Cleaning Industries?
This increased focus on automation can make people feel a little uncomfortable. Especially as more companies seem to work towards an increasingly automated workplace.

While some cleaning work will be lost, most of the industry is safe for now. The technology that most robots use is designed specifically for the home environment.

That means there is still a great need to clean up services in places like offices and hotels.

It also means that much of this work will be replaced by areas such as robotics and computer science. The latter, for example, has seen tremendous growth.

In the past year, the computer science sector featured about 500,000 jobs for 50,000 graduates. While work in this field may not be possible for some people, there are many ways to learn this skill for free.

At the end of the day, robot cleaning technology is great for everyone involved. We’ll see less waste, cleaner houses, and fewer back injuries. So next time you’re stuck removing trash or scrubbing dishes, remember – soon you’ll get help.

Place Your Trust In Our Experts In Commercial Gas Installation

Place Your Trust In Our Experts In Commercial Gas Installation

It can often be difficult for Essex companies to find genuinely reputable and cost-effective options for gas installation and whatever associated services they may require.

Place Your Trust In Our Experts In Commercial Gas Installation

As a family-run business with a long track record of catering to the most specialised gas and heating requirements of both homes and businesses throughout the area, Chelmsford Gas Services is the company in which you have been waiting to place your trust.

What Commercial Services Do We Offer?

You may turn to us in need of a one-off job, annual maintenance contract or complete Commercial Gas Installation In Chelmsford. Whatever your firm’s situation, we will take the time to understand and cater to your most specific requirements.

We have long served a very wide range of businesses and organisations, from warehouses and factories to workshops, showrooms and retail premises.

Some of those companies have approached us in response to a breakdown, while others have requested a simple service programme to enable them to maximise the longevity of their commercial gas and heating installation.

We Follow A Proven And Methodical Process

When you first get in touch with us about a commercial gas installation in Chelmsford, we can undertake a free site survey and advise you on how the characteristics of your system can be designed in accordance with your firm’s preferences.

A key part of our process is a close discussion with the client of the options available to them for a new gas installation, which include warm air, radiant, suspended or floor standing, we can install natural gas or LPG fuelled appliances.

Warm air systems are undoubtedly the most popular for commercial heating, and involve the passage of air over a heat exchanger, followed by its even distribution throughout a building.

Warm air units offer many advantages, including a high level of responsiveness and long service life, and when you have Chelmsford Gas Services carry out the installation, we will perform all of the work that may be required, including the installation of ducting to direct heat into separate areas or provide fresh air.

Get In Touch With Us Now About Commercial Gas Installation

There are so many reasons to use Chelmsford Gas Services beyond our know-how in commercial gas installation in Chelmsford. We are a genuinely reliable and reputable company, with all of our work being guaranteed and our engineers fully insured.

Why hesitate to get in touch with us to ensure your business benefits from the high-performing and cost-effective gas installation that it needs and deserves? Place Your Trust In Our Experts In Commercial Gas Installation

Canada Trademarks 101: What You Need to Know

 

Every new business owner has a million things to think about.

While it may be easy to overlook, one of the most important things you are looking for is a trademark for your services.

Like any legal process registering a trademark may seem confusing and complicated.

This article will simplify how to register a trademark in Canada.

Why Get a Trademark?
You are not legally required to register a trademark in Canada.

So why bother?

Registering a trademark is a proactive move that can avoid many headaches for your business in the future.

The benefits of registering a trademark include:

Exclusive nationwide use
Deterrent to competitors
Benefits with customs
You can trademark many different things, including logos, images, holograms, sounds, scents, tastes, and others.

How to Register a Trademark in Canada
Below is a general overview of the steps to registering a trademark in Canada. When registering your own trademark you should always consult a professional trademark service to ensure everything is being done properly.

Make sure your trademark is distinct from any others in the market
Complete a trademark application
An online form can be found at the website of the Canadian Intellectual Property Office (CIPO)
You’ll need to include a formal drawing if your trademark includes anything other than a word or words.
Pay the filing fee
Fees may vary but the current fees for the entire process can be found here
Wait patiently.
After You Submit Your Application
The Canadian government takes the trademark process by trademarks.

First, a thorough search and examination of CIPO’s records of existing trademarks is completed.

If no conflicting trademarks are found then your application will be published in the Trade-marks Journal.

If no opposition is voiced within two months of publishing, CIPO will approve your request and you will need to pay an additional registration fee.

Once paid, you’ll receive a certificate of registration and the registered trademark will officially be yours.

Maintaining Your Trademark
As of the writing of this article, a trademark in Canada may be registered for 15 years.

As the 15-year deadline approaches, you’ll need to pay a renewal fee to keep the rights to your trademark.

Policing Your Trademark
In addition to renewing your trademark, you are also solely responsible for policing your trademark once registration is complete.

If you become aware of any other individual or business using your trademark without your permission, you must take legal action to stop them.

It is very important to police your trademark.

If your business or an imitator is successful to the point where your trademark is considered a generic term, you may risk losing your trademark.

This process is known as genericization and is not uncommon.

It’s happened with brands like Zipper, Kleenex, and Xerox.

It’s up to you to ensure it does not happen to your brand.

Get Started
Now that you have a better understanding of how to register a trademark in Canada, it’s time to get moving.

Develop your trademark and get started today!

How to Sell Your Extra Test Strip

 

This is not a scam. And that is not a crime.

That’s the answer to two of the most prominent questions in your mind as you see one sign inviting you to sell a test strip you do not need.

Of course, both answers come with a warning. As you can imagine, there is plenty of room for funny businesses. Fraud comes in many shapes and sizes.

As for criminality, law enforcement tends to regard it as a gray market. The gray market is defined as:

… unofficial goods market not yet obtained from authorized suppliers:

Then again, by that definition, items purchased and sold on services like eBay and Craig’s List are also gray markets.

And while the market may be gray, not entirely unregulated.

Healthline insists that it is not illegal for a company to buy and sell test strips like this. They also said that the business was asked to register with the FDA, but many failed to do so.

Buyers bear the risk of buying from unscrupulous companies. As a seller, there are a few things you can do to make sure the system works for everyone:

Check the Expiration Date Before You Sell the Test Strip
The test strip will eventually expire. That’s why you should check the date, and only sell a safe test strip on that date.

The expiration date is a ticking hour, and may actually be a good reason for you to sell an unused test strip.

Many diabetics do not use all of their supplies in their recipe windows. They may be just diabetes borderline.

Their readings may be great at all times. They may only test once a day, not two or three times. But whatever the reason, they have an extra supply of lying.

Throwing a nice test strip seems a bit irresponsible and wasteful, especially when there are other options. If you know you will not get used to it, sell test strips well before it expires so others can do it.

Keep Test Strips Not Used Properly
Kind of like milk, strip expired test depends on how to keep it. Leave the milk on the table all day, and notice how quickly it expires.

If the test strips are stored improperly, they will also expire long before the expiration date.

The best way to keep it is in a dry climate at room temperature. Never freeze your strips. Also, keep away from humid or humid environments. Keep them out of direct sunlight.

If you plan to sell unused and unopened test strips, keep them properly for optimal longevity.

At the end of the day, there are people who want to buy your surplus test strip. They are serious with the diabetes test but have no insurance. Even through intermediaries, they still save a lot of money from retail prices.

The system is not perfect, but you can play your part by simply selling to reputable businesses, checking expiration dates, and storing surplus inventories correctly. The lives of others may depend on them.

Digitization Changing the Frontier of the Shipping Industry

Digitization Changing the Frontier of the Shipping Industry

The shipping industry and supply chain processes are currently suffering from a gross lack of real-time tracking data. This is leading to a great deal of inefficiencies which are costing shipping companies, drivers, brokers and more millions of dollars a year. With current technologies, shipment data and freight visibility are available with up to the second updates – but this is still not in wide spread use.
Carriers, shippers, brokers & 3PLs, and drivers all suffer from poor fleet management which is leading to a lessened sense of predictability in shipments, due to a lack of freight visibility. If you can track your shipments en route in real-time, with constant contact with the driver, you can not only provide a better service to your clients, but also greatly increase your own businesses’ efficiency and time / resource management. With the technology that is available today at our fingertips, there is no reason to be losing money due to insufficient data insight.

 

The push for better tracking and fleet management is coming from a number of different sources – shippers want better operational visibility over their fleet, carriers want to be able to provide their clients with more information for better customer support and care. There is a need for more cross-industry collaboration to streamline the shipment process and supply chain management.

Currently, three of the biggest areas for improvement in the shipping industry are:

1. Information sharing in regards to supply chain management, 2. Freight visibility and predictability, and 3. Coordination for carrier partnerships

Each one of these shipping industry segments can be optimized for greater efficiency through available technology. Early adapters in freight management companies are already taking advantage of it, but so far there has been overall resistance to change.

Luckily for the shipment industry, change is coming. Many shipment companies, drivers, carriers and brokers have already begun to use freight management software, and its use is continuing to climb. With the competitiveness of the shipping industry, the widespread use of tracking apps should spread like wildfire. Once the big players adopt the practise of real-time tracking and data collection, it will become industry standard.

LED cooling technology and cooling materials

LED cooling technology and cooling materials

Heat dissipation is a major factor affecting the intensity of LED lighting. Heat sink can solve the problem of heat dissipation of low illumination LED lamps. A heat sink can not solve the 75W or 100W LED lighting cooling problem.
In order to achieve the desired illumination intensity, active cooling technology must be used to solve the heat released by the LED lamp assembly. Some active cooling solutions such as fan life are not high for LED lamps. In order to provide a practical active cooling solution for high brightness LED lamps, the heat dissipation technology must be low energy consumption; and can be applied to small lamps; its life is similar to or higher than the light source.

LED cooling technology and cooling materials

Cooling method

Generally speaking, in accordance with the way from the radiator to take away the heat, the radiator can be divided into active cooling and passive cooling. The so-called passive heat, is through the heat sink heat source LED light source naturally distributed to the air, the cooling effect is proportional to the size of the heat sink, but because it is naturally distributed heat, the effect of course greatly reduced, often used in those space No demand for the equipment, or for the heat of the parts of the heat dissipation, such as some popular motherboard in the North Bridge also take a passive cooling, the vast majority of take the initiative to heat, active cooling is through the fan and other cooling equipment forced The heat will be sent out of the heat sink, which is characterized by high thermal efficiency, and equipment, small size.

Active cooling, subdivided from the way heat can be divided into air-cooled heat, cooling heat, heat pipe cooling, semiconductor refrigeration, chemical refrigeration and so on. LED cooling technology and cooling materials

Air-cooled air cooling is the most common way of cooling, in comparison, is also cheaper way. Air cooling is essentially a fan that takes away the heat absorbed by the radiator. With the price is relatively low, easy installation and so on. But the environmental dependence is relatively high, such as the temperature rise and overclocking its thermal performance will be greatly affected.

Liquid cool

Liquid cooling heat is driven by the liquid in the pump driven by the heat to take away the radiator, compared with the air-cooled, with a quiet, cooling stability, the advantages of small dependence on the environment and so on. The price of liquid cooling is relatively high, and the installation is also relatively cumbersome. At the same time as installed in accordance with the instructions to install the instructions in order to get the best cooling effect. For cost and ease of use considerations, liquid cooling heat is usually used as a heat-conducting liquid, so liquid-cooled radiators are often referred to as water-cooled radiators.

Heat pipe

The heat pipe is a kind of heat transfer element which makes full use of the heat conduction principle and the rapid heat transfer property of the refrigerant. It conveys heat by evaporation and condensation of the liquid in the fully enclosed vacuum tube, has extremely high thermal conductivity, good isothermal The heat transfer area on both sides of the hot and cold can be arbitrarily changed, can be a long distance heat transfer, can control the temperature and a series of advantages, and heat pipe composed of heat exchanger with high heat transfer efficiency, compact structure, advantage. Its thermal conductivity has far exceeded the thermal conductivity of any known metal. LED cooling technology and cooling materials

Avoid the Tree Removal Fail and Call the Experts

 

As you looked up at the tree in your yard, you noticed something.

The branch that looked ok before, does not look so hot now. Maybe it’s closer to your roof than it was.

Or it’s hanging on by a leaf and could fall onto your driveway. And hit your car.

Either way, that branch has got to go. But if you do it yourself, you will likely do more harm than good.

Here’s why you should hire a professional arborist.

A pound of cure
We’ve all heard the saying, “an ounce of prevention is worth a pound of cure”.

In the case of the trees in your yard, it’s more than just a pound.

The average oak tree can weigh Thousands of pounds.

OK, so maybe only a branch will fall down.But it’s twenty feet above your head.

That’s plenty heavy enough to possibly do some serious damage.

It’s also impossible to predict what will happen during the storm. Those branches may hang on for another six months.

Or, it could be six minutes.

Do you want to take that chance? If not, make sure you’re taking care of your trees.

Seasonal maintenance
You want the trees in your yard looking beautiful year-round.

You like watching the trees come to life in the spring. Lush, green leaves provide shade on a hot summer’s day.

In the fall, the oranges and reds are a perfect look when there’s a nip in the water.

To keep your trees looking their best, you need to maintain them.

Some of the smaller parts, closer to the ground, you might be able to take care of yourself. But the Department of Agriculture suggests hiring a professional for anything over 2 “in diameter.

And, did you know that if you trim a tree incorrectly you can inadvertently damage it?

Once a tree is damaged, it’s more likely to have issues and possibly even die.

Proper pruning also encourages new growth and can help trees withstand the winter better.

A professional arborist will know what’s best for the size and type of trees you have.

Not just for decorative trees

Shade in the summer is good, but a fresh apple from your tree in the fall is delicious.

Proper, seasonal maintenance also applies to your fruit trees. If you prune them at the time, it will encourage fruit production for the following year.

Preventative maintenance
Along with knowing the best and safest way to trim your trees, a professional can assess their current health.

They can recognize signs of pest damage, or conditions like Dutch elm disease.

If those can not be corrected or controlled, they can perform a safe tree removal.

How often do my trees need trimming?
Typically, once a year will be sufficient.

The Arbor Day Foundation suggests avoiding pruning your trees in the fall. Trees are slower to heal in the fall, and it may promote the spread of fungus.

And of course, you’ll want to contact a professional sooner if you see limbs that:

May overhang walkways
Are near power lines
Were damaged by a storm or the wind
Safety first
Trimming a tree branch is not like cutting one of your shrubs or hedges.

There are factors to take into account like:

Where will the limb fall once it’s cut?
How will it affect the rest of the tree?
Is it caught up in other branches that will also fall?
A professional knows how to assess the situation properly for safe removal.

Do not let it be a shocking experience, either
Trees can also be growing near your electrical and phone lines. Or, maybe there’s a storm and the branches break and hit the lines.

Either way, you want to avoid having that happen.

Keeping your trees trimmed.co.uk can prevent a middle-of-the-night problem. And if it does happen, your utility company’s emergency line is your first call.

Downed electrical lines are a serious hazard – the ground can be energized up to 35 ‘away.

Make sure you know what to do in case this dangerous situation occurs.

Emergency removal
Sometimes, despite your best efforts, Mother Nature has a different idea.

The wind was howling and a branch was torn loose. And it landed on your roof.

Not only do you need that branch off the roof before it falls, but it needs to be done correctly.

If you decide to climb up on a ladder and yank it off the roof, now you have two risks:

Falling off the ladder
Further damaging your roof
A professional arborist can help minimize the damage by removing the limb safely and quickly.

Hiring a pro can actually save you money
You might be a pretty handy DIY kind of person.

And your budget is tight, so you try to do things yourself. But tree trimming is not a time to cut corners, so to speak.

It requires specialty tools and experience the average homeowner does not have.

Things like:

Chainsaws
Rope and pulleys
Truck capable of hauling away the wood if needed
The know-how to use all these safely and effectively
DIY is great for painting and other stuff but you should hire a professional for your trees.

Insurance

Another way a certified arborist can save you money: insurance.

What if

Chiropractic Care for Runners: Things You Need to Know

Chiropractic Care for Runners: Things You Need to Know

 

It does not matter whether you want to lose weight or just want to stay in shape, running is a great form of exercise. Just one hour of tight walking is more than enough to stay in shape. Of course, you need to build your stamina over a period of time, so you can do more things on the track. Runners often make mistakes in connection with their appearance, and injury is also unusual. If you’re a runner, you should consider looking at a chiropractor. In this post, we will discuss some aspects that are worth noting.
Type of Injury

Chiropractic Care for Runners: Things You Need to Know

As a runner, you may face two types of injuries – overtraining injuries and traumatic injuries. The latter is associated with an unexpected accident or trauma. For example, if you fall on the track while running, you may end up with a sprained knee or broken bone. In contrast, injuries associated with overtraining are more common. In this case, you may have pain in your knees, ankles, feet and other body parts, just because you run more than your body can take. The most serious runners have a tendency to push themselves, and therefore, injuries related to overtraining are more common.

Do I need a Chiropractor?

The chiropractor who is running specializes in treating the wounds that are common to runners. Many sports chiropractors also offer care and help for runners. They know the mistakes you might make on the track, especially if you often get injured. Also, they can be helpful in treating injuries related to trauma or unexpected accidents. Chiropractors use a number of different techniques and different types of manual adjustments, which are very useful in reducing pain and overall body stress. You will notice a big difference in your form and fitness with regular sessions, especially if you choose to visit the clinic every few weeks.

Knowing the Benefits

As a runner, you may get a number of benefits by visiting a chiropractor. They help reduce the stress and physical tension experienced by the body during the runners. They also guide runners to avoid form-related errors, so they are not hurt while on the go. In addition, running a chiropractor is great at reducing recovery time after a traumatic injury. As required, they may use a number of alternative therapies, so the body begins to heal itself, but without being heavily dependent on drugs and drugs. Chiropractors help runners in doing better, even if they are not in their best shape. Chiropractic Care for Runners: Things You Need to Know

If you want to know more about chiropractic care for runners, you should make an appointment with a reputable clinic in your area to find out more. Do not avoid asking questions when meeting a chiropractor for the first time.

How Americans Can Get Their Recipes from Canada

How Americans Can Get Their Recipes from Canada

It’s no secret that the medical costs and the American recipes are getting out of reach.

Just last year, EpiPen, which treats sudden allergic reactions (including potentially fatal), jumped in overnight prices to $ 600.

Before that, Daraprim, a drug that helps people with AIDS, rises overnight by 5,000%.

And this happens even with the many drug choices that were not there twenty years ago.

Thanks to such a steep price increase, many Americans are now considering filling out their recipes at Canadian (or even online) pharmacies from Americans.

There are positive and disadvantageous side for patients seeking outside America for cheaper treatment:

Weakness of filling in Canadian pharmacies
The first problem is the general cost.

While Canadian medicines the price may be cheaper, there are shipping and handling fees to consider.

Sometimes, the cost of shipping and handling plus drugs actually makes it more expensive than if purchased at an American pharmacy.

Then there is the US dollar fluctuating versus the Canadian dollar value.

In general, $ 15 USD equals CAD $ 20, but that can change every day.

And, of course, the drugs purchased at a Canadian pharmacy will be sold in CAD.

Another problem is technically illegal.

By law, the Food and Drug Administration must approve all drugs manufactured and sold in the United States.

Drugs produced outside the United States are outside of its jurisdiction.

Plus, while most online pharmacies are proven to be legitimate, some are found to sell low-quality drugs.

The top fills the Canadian pharmacy
Fortunately, though, the drugs purchased in Canada as a whole are much cheaper than those bought in America.

For example, let’s take the drug Copaxone, which commonly treats multiple sclerosis.

A one-month supply in Canada can be as low as $ 1200, but in the US it costs at least $ 4,500.

That’s because the Canadian government controls the price of drugs sold in its pharmacies.

This arranges costs so that pharmacies and companies can not charge whatever they want. Thus, the price must remain within a certain range.

In America, there is no regulation on the price of drugs, which is why an outrageous price increase is allowed.

Pharmacies and companies can charge whatever they want. It spelled bad news for the patient’s bank account.

So really, it’s not hard to see why American patients shop outside their home country for better prices (and in some cases, affordable) as per their recipes.

While technically illegal, the FDA is not quick to prosecute those who fill their prescriptions at Canadian pharmacies.

In general, they sometimes ignore the import of drugs from Canada, as long as the drug is used alone and the patient only has a supply for three months.

There is also an inter-state movement to allow residents to buy drugs from government-approved non-government pharmacies.

This movement is called the “I-SaveRx” program. Countries that have approved the program include Kansas, Missouri, Wisconsin, and Illinois.

Given the movement toward more options available outside the United States, it is best to consider all the options on the table while filling the recipe.

Find Out What is Fashion Marketing So You Can Reduce Competition

The fashion industry is huge, generating $ 1 trillion in gross revenue annually.

Yes, it’s “trillion” with “t.”

So what is fashion marketing? This is the range you need to separate your product from competition and succeed in the world’s harshest retail industry.

Here are some tips to help you get started and gain excellence in the competition.

Have Great Products and Know Your Niche
It all starts here right?

Many people sell underwear, so if you sell underwear, it’s better to have something that sets it apart from the competition.

Better materials A good story. Well suited.

Whatever the product, you need to understand exactly what you are selling and how it fits the competition – so do your research before you develop your marketing plan.

It does not matter if you ask people to “Click Here” to buy grillz or sell winter parka. All successful fashion marketing begins with knowledge of products and research in the marketplace.

That’s the first task of your newly printed marketing team (though it’s just you!).

Social Media Is Your Friend
When looking for sterling examples of what is fashion marketing, look no further than social media.

Facebook. Instagram. Pinterest. Even Snapchat.

The fashion industry leads almost all industries when it comes to experimenting with social media.

After all, social media has become increasingly visual and fashion is nothing but the first picture-industry. Studies have shown that completely one out of three consumers have purchased clothing items after viewing them on Instagram.

If you hate social media, sorry – it’s important you learn to love him or hire someone who does it.

Find Great Influencer in Your Niche
Speaking of people who turn to social media like a proverbial fish to water, influencer marketers have become a big part of what is marketed in fashion by 2017.

What is that?

Simply put, influencers marketing is when a company or brand contracts with someone who has an established and large social media presence in their target niche to promote a product.

This is basically a celebrity endorsement for the 21st century.

How important is it? More than six in 10 fashion companies make influencers as part of their marketing strategy in 2016, with another 21 percent planning to incorporate it in 2017.

Do not Forget Your Land Game
Social media is good to talk about because it can be accessed anywhere, but the soul of fashion marketing is still on the ground.

So go to trade shows, fashion shows, and make connections.

Show off your collection. Do a trunk show. Co-sponsored an event.

The key is preparing your digital marketing game so that when you face the community with the product, the conversation can continue in the digital space with websites, email, social media, and so on.

Land games are an opportunity for people who find you through digital space to gain tactile experience – viewing their products, touching products – as well as opportunities for those who have seen the product engage in ongoing dialogue with the brand before they buy.

What is Marketing Mode? It’s up to you
With so much competition, the most important thing is to stand out. Take a risk.

Some brands do their marketing via e-mail only. Some do great stunts.

Others just stand by their great products, tour the country performing, and rely on word of mouth.

After all, you need a good photo.

A nice picture, however, says a thousand words. And that means dollars.